CAS-SYSTEM

  • DATA CENTER
    CASSETTE SYSTEM - 10GbE

    48 Port HD Panel - Pre-terminated - High Quality

Modular cassette system for state-of-the-art data center networks

Designed for data centers and rack to rack connection

The modular cassette system of TKM is qualified to minimise the on-site installation time and provides addtionally a wide range of variety. The factory assembled copper or fiber trunks can directly be pulled in and can be mounted without any assembly tool into the corresponding chassis just by click and go. This cassette solution covers all standard cabling classes for copper (Cat. 6A and Cat. 6) and fibre optic networks (OM5 - OM3 ans OS2). Network extensions planned for the future can easily be realised by the on-site network technician as the add-on components such as the splice version of the fiber cassette is exactly designed for on-site termination.

 

 

Installation Time

Safe up to 75% of the time typically on-site needed by using factory made cabling systems

Mixed Operation

Mixed ports per patch panel: RJ45 / SC / LC

High Density 

48 ports in one U

Fire Protection

CPR class consistent with the application requirement - typically Dca

Time saving and easy installation

The installation time can be reduced up to 75% with factory terminated and tested trunk cables - this saves valuable working hours and reduce the costs of the installation. The trunks cables are equipped with pull-in dust protection as-delivered condition and therefore they can placed in double floors or on cable raceways. A plug and play mounting into the chassis is been realised with the latching mechanism of each cassette type - consequently only the cable itself has to be laid professionally.

Cable management

The rear side cable management is been realised with a cable management bar which is adequately dimensioned to provide a perfect strain relief to each cassette type. An additional cable management unit for the front side is offered. This unit can be mounted directly with two of four existing screws of the chassis. The advantage is that a zero unit space reserve is needed and this cable management unit can also be retrofitted to every already installed patch panel. With the labelling option on the hinged front plate a mix-up of patch cords is excluded. More ...

Variants

The modular cassette system has all the features that a state-of-the-art cabling system should offer. These are high packing density in one unit, mixable operation with copper and fibre optic ports in one unit and suitable for all variants of different connections.

Fiber optic connectivity:

  • link class: OM5 / OM4 / OM3 / OS2-PC / OS2-APC
  • connection type: factory made / on-site splicing / MPO/MTP®
  • connector type: LC / SC / MPO

Copper connectivity:

  • link class: Cat. 6A STP / Cat. 6 UTP
  • connection type: factory made / on-site termination
  • connector type: RJ45

Advantages

  1. MINIMUM INSTALLATION TIME
  2. CHANNEL LINKS WITH MEASUREMENT PROTOCOL
  3. MIXABLE HD PANEL
  4. VERSIONS: FACTORY MADE - ON-SITE SPLICING - MPO/MTP®
  5. VARIOUS CPR CLASSES
  6. 25 YEARS OPTILAN SYSTEM GUARANTEE

Core elements

6x RJ45 STP - CAT. 6A - DATA TRUNK CABLE
VERSION: FACTORY MADE

Data trunk cable factory terminated and with measurement protocol - slim trunk cable with only 14mm in diameter - extremely small fire load - factory terminated up to 60m length - standard CPR class Dca - very easy snap-in and commissioning. More ...

6x RJ45 STP - CAT. 6A - MODULAR CASSETTE
VERSION: ON-SITE TERMINATION

Modular cassette for the on-site termination with typically AWG23 S/FTP installation cable / horizontal cable - high value gold plating of the contact pins - strain relief for each cable - PoE++ (4PPoE) - port labelling option - IDC termination block. More ...

6x RJ45 UTP - CAT. 6 - MODULAR CASSETTE
VERSION: ON-SITE TERMINATION

Modular cassette for the on-site termination with typically AWG23 F/UTP installation cable / horizontal cable - high value gold plating of the contact pins - strain relief for each cable - PoE++ (4PPoE) - port labelling option - IDC termination block. More ...

6x LC-DX - MODULAR CASSETTE
VERSION: MPO/MTP®

Modular cassette assembled with MPO or MTP® breakout - OM5 / OM4 / OM3 / OS2-PC / OS2-APC - sealed and tested cassette - easy installation, snap-in and connect - polarity A/B/C.  More ...

6x LC-DX - MODULAR CASSETTE
VERSION: FUSION SPLICE

Modular cassette with assembled pigtail set - OM5 / OM4 / OM3 / OS2-PC / OS2-APC - sealed and tested cassette - easy installation, snap-in and connect - for splice protector version: crimp or heat shrink.  More ...

6x LC-DX - MODULAR CASSETTE
VERSION: FACTORY MADE

Fiber optic trunk cable factory terminated - sealed cassette and with measurement protocol optional - standard CPR class Dca - very easy snap-in and commissioning for a minimum of installation time.  More ...

6x SC-DX - MODULAR CASSETTE
VERSION: MPO/MTP®
 

Modular cassette assembled with MPO or MTP® breakout - OM5 / OM4 / OM3 / OS2-PC / OS2-APC - sealed and tested cassette - easy installation, snap-in and connect - polarity A/B/C.  More ...

6x SC-DX - MODULAR CASSETTE
VERSION: FUSION SPLICE

Modular cassette with assembled pigtail set - OM5 / OM4 / OM3 / OS2-PC / OS2-APC - sealed and tested cassette - easy installation, snap-in and connect - for splice protector version: crimp or heat shrink.  More ...

6x SC-DX - MODULAR CASSETTE
VERSION: FACTORY MADE

Fiber optic trunk cable factory terminated - sealed cassette and with measurement protocol optional - standard CPR class Dca - very easy snap-in and commissioning for a minimum of installation time.  More ...

CHASSIS FOR UP TO 8 CASSETTES

Empty chassis with a capacity for 8 cassettes - for a maximum of 48 RJ45 ports or 96 optical fibers - supports mixed operation of copper and fiber connectivity - cable management bar and earthing point - port labelling. More ...

 
All available single components for a cassette system
 
View as

7 Items

12
  • 12
  • 24
  • 36
per page
Filters
  • Position
  • Product Name
Product Name
  1. Chassis - 19 inch - 1.0 U - empty - max. for 8 cassettes
    Add to Compare
    1,0
    SILVER
    8x
    HD
    SKU#: 4677270 Chassis - 19 inch - 1.0 U - empty - max. for 8 cassettes
    The chassis for the TKM pre-terminated cabling system contains 8 banks for cassettes. It can be equipped with copper cassettes (6x RJ45) as well as with FO cassettes (6x LCdx or 6x SCdx).
  2. Modular Cassette 6x RJ45 - cat. 6A – 500 MHz – STP - HD
    Add to Compare
    500
    PoE++
    HD
    23, 24
    SKU#: 4677271-MOD Modular Cassette 6x RJ45 - cat. 6A – 500 MHz – STP - HD

    The TKM 6x RJ45 modular copper cassette is shielded cat. 6A acc. to ISO/IEC 11801 amendment 2 is component rated to category 6A acc. to EN 60603-7-51. It is applicable in permanent link class EA (500 MHz) acc. to ISO/IEC 11801 amendment 2 for 10 GBASE-T acc. to IEEE 802.3an.

  3. Patch Cord - cat. 6 - 250 MHz - STP - colour: [YY] - length [m]: [XXX]
    Add to Compare
    250
    PoE+
    GR, BL, BK, RD, YE, GN, VI
    26
    SKU#: PC60-7YY1RT00-XXXX-EV Patch Cord - cat. 6 - 250 MHz - STP - colour: [YY] - length [m]: [XXX]
    The TKM RJ45 shielded patch cord cat. 6 is applicable for network links of class E (250 MHz) acc. to ISO/IEC 11801 amendment 2 acc. IEEE 802.3an. The patch cord can be used for all applications according to EN50173-1 inclusive PoE+.
  4. Patch Cord - cat. 6A - 500 MHz - STP - colour: [YY] - length [m]: [XXXX]
    Add to Compare
    500
    PoE+
    GR, BL, BK, RD, YE, GN, VI
    26
    SKU#: PC6A-7YY1GE00-XXXX-EV Patch Cord - cat. 6A - 500 MHz - STP - colour: [YY] - length [m]: [XXXX]
    The TKM RJ45 shielded patch cord cat. 6A is applicable for network links of class EA (500 MHz) acc. to ISO/IEC 11801 amendment 2 for 10 GBASE-T acc. to IEEE 802.3an. The patch cord can be used for all applications according to EN50173-2 inclusive PoE+.
  5. RJ45 trunk - multi link - (Dca) - RJ45 cassette each side 6x cat. 6A - length [m]: [XXX]
    Add to Compare
    500
    PoE
    Dca
    S/FTP
    SKU#: 4677271-XXX RJ45 trunk - multi link - (Dca) - RJ45 cassette each side 6x cat. 6A - length [m]: [XXX]
    The TKM pre-terminated cabling system, shielded with 6x RJ45 cat. 6A ports on each side is applicable for network links of the permanent class EA (500 MHz) acc. ISO/IEC 11801 amendment 2 for 10 GBASE-T acc. IEEE 802.3an.
  6. Subrack Mounting Adapter (BGTR) for modular cassette system
    Add to Compare
    3,0
    SILVER
    1x
    N.A.
    SKU#: 4677400-BG Subrack Mounting Adapter (BGTR) for modular cassette system
    TKM subrack mounting adapters for MPO / RJ45 modular cassettes are made for the usage in subracks. Because of the Eurocard format it is made for the use in standardized subracks.
  7. T-coupler for 2x HC - cat. 6A - 500 MHz - STP
    Add to Compare
    500
    PoE+
    N.A.
    22, 23, 24
    SKU#: 467768230 T-coupler for 2x HC - cat. 6A - 500 MHz - STP
    The TKM T-coupler, shielded, cat. 6A is made to connect two horizontal cables and is applicable in permanent link class EA (500 MHz) acc. ISO/IEC 11801 amendment 2 for 10 GBASE-T acc. IEEE 802.3an.
View as

7 Items

12
  • 12
  • 24
  • 36
per page
Filters
  • Position
  • Product Name
Product Name
Copyright © 2021-2024 · TKM GmbH · Alle Rechte reserviert.