Installation Accessories (IA)
Products which are used as installation accessories e.g. mounting sets to install 19inch components or typical installation helper such as splice protectors, fiber optic adapters or fiber launch spools are listed in this category.
-
SKU#: MS-MH-0002 De-mounting helper for clipsed fo adapters - footprint: LCdx/SCsx - colour: black
Different accessories for the installation and operation time.
-
SKU#: MS-MH-0001 De-mounting helper for clipsed fo adapters - footprint: LCquad/SCdx - colour: black
Different accessories for the installation and operation time.
-
SKU#: 3XX-30-N-C-S FO adapter - E2000 simplex - colour: [XX] - with flange - with shutter
The TKM fibre optic adapters are available from stock in the standard versions (LC, SC, E2000). They are realised in different mounting types, e.g. for screw mounting or toolless snap-in mounting. All adapters are conform to the requirements of IEC 61754 and TIA 604.
-
SKU#: 2XX-10-N-C-W FO adapter - LC duplex - colour: [XX] - with flange - with metal clip - without shutter
The TKM fibre optic adapters are available from stock in the standard versions (LC, SC, E2000). They are realised in different mounting types, e.g. for screw mounting or toolless snap-in mounting. All adapters are conform to the requirements of IEC 61754 and TIA 604.
-
SKU#: 2XX-20-N-C-W FO adapter - LC quad - colour: [XX] - with flange - with metal clip - without shutter
The TKM fibre optic adapters are available from stock in the standard versions (LC, SC, E2000). They are realised in different mounting types, e.g. for screw mounting or toolless snap-in mounting. All adapters are conform to the requirements of IEC 61754 and TIA 604.
-
SKU#: 1XX-10-N-C-S FO adapter - SC duplex - colour: [XX] - with flange - with metal clip - without shutter
The TKM fibre optic adapters are available from stock in the standard versions (LC, SC, E2000). They are realised in different mounting types, e.g. for screw mounting or toolless snap-in mounting. All adapters are conform to the requirements of IEC 61754 and TIA 604.
-
SKU#: 1XX-30-N-C-S FO adapter - SC simplex - colour: [XX] - with flange - with metal clip - without shutter
The TKM fibre optic adapters are available from stock in the standard versions (LC, SC, E2000). They are realised in different mounting types, e.g. for screw mounting or toolless snap-in mounting. All adapters are conform to the requirements of IEC 61754 and TIA 604.
-
SKU#: 47001-XXXXXX-XX-XXXX FO launch spool - connector A [XXX] / connector B [XXX] – type of fibre [XX] – Corning - lenght: [m]: [XXXX]The TKM FO launch boxes are direct applicable to use for OTDR measurements. FO launch boxes are necessary to measure clearly a FO measuring section.
-
SKU#: PP4-ACC-FGE FO patch panel system - modular - fiber guiding element - SET=4 - beige
The FO patch panel system – modular and self configurable – is realised as a modular construction kit und can be mounted on-site with any production related tool. It is ready to serve for a lean stock management in terms of variations and for the final mounting of the configuration at the installation site.
-
SKU#: 4780002 Press for splice protectors type: SP-CRThe TKM crimping press is required to fix the splice protector optimally onto the position of the fibre to be protected. The press is used to process the protector to its final dimensions.
-
SKU#: 4780016-CSS Splice Protector - type crimp (CSS)The TKM splice protector type crimp (CSS) is used for protecting fibre optic fusion splice connections with the highest quality
-
SKU#: 478003X Splice protector - type: heat shrink – dimensions [mm]: [XXxX,X]The TKM splice protector type heat shrink protector is used for protecting fibre optic fusion splice connections.